Started prints
0
Material usage
0
Hours printed
0
Everything in one place
SimplyPrint brings all the things you need for 3D printing into one place.
Printing
Management
Filament inventory
Easy setup on multiple printers
SimplyPrint is easily set up on multiple printers at once, making it quick to have the whole farm running smarter, faster.
Create account
Install SimplyPrint
Connect your printers
Print like never before
Get started with SimplyPrint
You're only a few minutes away from a whole new 3D printing experience.
The only thing required is a Raspberry Pi for your printer and an internet connection.
Don't just take our word for it
With up to 720 daily print hours, it would be a big challenge to monitor to keep track of the tasks without it.
And that was just the beginning
Designed for ease of use, elegance and a better 3D printing experience
Get SimplyPrint
Start prints on one, or multiple printers - at the same time
Never again think about SD cards - everything is wireless, and prints are started in a matter of seconds
Learn more
Print queue
Put prints in the queue, and keep track of how many times files have been printed, and how many you still need to print
Files in the cloud
Store all your files in one single cloud and start prints from old files with one click. Have shared folders with colleagues and see how often a file has been printed
Filament change assistant
Have your printer heat up and pull out the filament for you while you find and prepare the next spool
Multiple users - groups and permissions
Multiple people running the farm? No problem! Taylor permissions for each individual user, or for user groups, and manage the farm with your colleagues
Printer control panel
Take full control over your printer with the fully featured control panel - monitor and control your printer wirelessly from any device
Learn more
Multiprint
Start the same print on several different machines, at once
Filament management
Easily keep track of all your spools of filament, complete with usage tracking on all your spools so that you never run out of filament before the print is done
Bed Leveling Assistant
Easily dial in the leveling on your printer with the bed leveling assistant
Print updates along the way
Get Get notified when your printer needs attention.
- On print finish
- On print pause
- On filament runout
SimplyPrint ⚫ Now
Print started on Printer 1
Estimated print time is 3d 4h
SimplyPrint ⚫ Now
Print finished on Printer 2
Took 2h 32m
Ready for a better 3D printing experience?
Pricing
Get a quote
Frequently asked questions
Which printers work with SimplyPrint?
Check out the compatibility list to see if your printer(s) are on the list of known supported printers. If your printer isn't on the list; fear not, we might just not know about it.
What if SimplyPrint goes down or we lose internet?
Your ongoing prints won't stop either; when starting a print through SimplyPrint, the GCODE file is downloaded to your printer, so any print started through SimplyPrint will keep going no matter what. Using SD cards or local wireless printing like OctoPrint will still work, and when you have access to SimplyPrint once again, we will even pick up the print and show the progress in the panel.
Just for the record, SimplyPrint has a 99.99% uptime, so downtime from our side is very unlikely.
How many printers can SimplyPrint handle?
Is it secure?
Furthermore, our servers are hosted with providers known for being some of the best secured on the market, we use bank-grade encryption for your sensitive data and of course the maximum security possible when it comes to accessing our servers and databases.
It's our job to ensure your printer is safe, and it's a job we take very seriously.
My customer's designs are private - are the files private and secure?
Prints not stored in the SimplyPrint cloud, but just sent to the printer manually, can only be downloaded once; by the printer, after this, the file is inaccessible for anyone, and will be automatically removed after 24 hours.
SimplyPrint employees doesn't have the tools to view the contents of your files either.
The team
About our company
SimplyPrint was founded in January 2020, but the idea for SimplyPrint, as well as the first functional version, dates back to our time as students in 2017.
We kept bumping into the same problem; no one knew how to use the school's four 3D printers - there was simply too much to get acquainted with, too many different programs, the fumble with SD cards - it was all just too cumbersome.
We tried a million different things, like OctoPrint for each printer, existing cloud solutions for management of multiple printers, but nothing seemed to solve the underlying issue; 3D printers weren't simple to use and it was too easy to mess up.
So, in 2017 we started, for fun, to code an interface that let the students and teachers easily start prints, and it was a big success; the 3D printers suddenly didn't just gather dust anymore, and everyone had the time and ability to use them. With the local in-school success of the software, we shared some pictures of it in a Facebook group for 3D printing, an suddenly a hunred people were interested in getting it for their own printer(s).
This prompted us to keep developing what today has turned into SimplyPrint, with one goal in mind; make 3D printing as easy and smart as it should be.